The Peco Service And Meter Application form serves as a critical document for initiating electric service requests and meter installations or alterations within the PECO service area. This comprehensive form guides applicants through various requisite details, including personal information, service details, construction status, and technical specifications needed for PECO to process the request efficiently. It is mandatory for individuals or businesses seeking new connections, upgrades, or modifications to their electrical service.
Applying for electric service and ensuring the proper installation of a meter can be a meticulous process, requiring the submission of a comprehensive form to initiate services. The Peco Service and Meter Application form, detailed with structured guidance, serves as a critical document for residents and businesses in regions covered by PECO. The form captures a wide array of information, starting with the applicant's identification details, including the requirement for a driver's license number or social security number, and progressing to technical specifications regarding the type of service request, such as new service installation, service upgrade, or demolition. It also outlines the specifics about the service location, customer billing address, and information from the electrician or contractor responsible for the work. Furthermore, it delves into the characteristics of the electric service required, metering information, heating and air conditioning details, and load characteristics, which help PECO assess and fulfill the electric service needs efficiently. Applicants must also indicate their current construction status and provide a projected date for when the service is needed. The form stresses compliance with PECO Electric Service Requirements and the necessity for an approved inspection, ensuring safety and regulatory adherence. It concludes with a section for the applicant's signature, cementing the commitment to proceed with the requested service under the terms outlined by PECO. By filling out this form, applicants initiate a process that enables PECO to analyze and respond to their service requests, aligning with the technical and infrastructural capacities of their location.
INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER
Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM
A.After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.
B.Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.
Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.
(**) Use the address of the service when applying for underwriter's inspection.
C.Complete the fields for customer's PECO billing address or account number (within last 60 days).
D.Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.
E.Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".
F. thru J. Indicate the following:
•Type of Request
•Type of Service (include number of units and area per unit)
•Service Characteristics
•Meter Information
•Heating/Air Conditioning
K.Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.
L.Complete the table concerning motor information.
M.If compensated metering will be used, indicate totalizer and general load (KW).
N.Include any additional comments.
O.
Application MUST be signed and dated.
Forms Rev. 5/18
PECO
Application for Electric Service & Meter
M-24175 (front) Rev. 5/18
INSTRUCTIONS:
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL 8-1-1 (PA ONE CALL) FOR DEMOLITION REQUEST
NEW BUSINESS SERVICES (1-800-454-4100) http://www.peco.com
PHILADELPHIA
DELAWARE & CHESTER COUNTIES
BUCKS & MONTGOMERY
NEW RESIDENTIAL
COUNTY
1050 W. Swedesford Rd.
COUNTIES
CONSTRUCTION
A
830 S. Schuylkill Ave.
Berwyn, PA 19312
400 Park Ave.
(All Counties)
Philadelphia, PA 19146
Email:DelChesterServiceApplications@ex
Warminster, PA 18974
Email:PhilaNewBusiness@e
eloncorp.com
Email:Bucksmontserviceapplications@e
Warminster, PA
18974
xeloncorp.com
Fax # (610) 725-1416
Email:NRCGMETERORDERS@P
Fax # (215) 731-2327
Fax # (215) 956-3240
eco-Energy.com
Fax # (215) 956-3380
CUSTOMER NAME
Tax ID # or SSN
TYPE OF REQUEST
New Service
Load Increase/Decrease
Reintroduction of Service
Temporary Service
Upgrade/Changes
Demolition (Remove
Separation of Wiring
Service Relocation
Service)
** ADDRESS TO BE SERVED
B
APARTMENT/LOT #
F
Make-Safe (De-
energize/Cover)
CITY, STATE
ZIP CODE
TYPE OF SERVICE: Please include site plan.
RESIDENTIAL
COMMERICAL
Single House
Mobile Home
Store
Office
G
Apartment
Modular Home
Industrial
Warehouse
UTILITY POLE#
SUBDIVISION/DEVELOPMENT
TOWNSHIP/MUNICIPALITY/WARD#
Duplex
Town House
Restaurant
Other _____________________________
Area of Building _______________________ Sq. Ft.
* If Applicable
SERVICE CHARACTERISTICS:
** Please use this address when applying for underwriter’s inspection
PHASE
VOLTS
WIRES
Underground
Aerial
CUSTOMERS BILLING ADDRESS
C
-OR-
PECO ENERGY ACCOUNT#
3
240
AMPS _________
120/240
4
120/208
TELE. #
1
120
2
277/480
13200
3 or 4
SEND REPLY TO:
5
33000
ELECTRICIAN’S OR BUILDER’S NAME
METER INFO:
Two Meters, Commercial (General/Totalizer)
I
Single Meter Required
Multiple Meter Total No. _____________
ADDRESS
Reply Requested by:
HEATING/AIR CONDITIONING:
D
/
Central Air _____ Tons
Resistance
J
Heat Pump _____ Tons
Natural Gas
Propane
Type Back-Up _________
Other ________________
City, State
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD:
CONNECTED
PECO ENERGY USE ONLY (DEMAND)
TYPE
LOAD (kW)
E-MAIL ADDRESS
SUMMER (kW)
Winter (kW)
LIGHTING
K
CURRENT CONSUTRCTION STATUS:
HEATING
Not Started – Date Customer Will Start Work: _____/_____/_____
In Progress Completed
AIR/COND.
Approximate Date Service Requested: _____/_____/_____
E
TANKLESS WATER HTR
MISC
CUSTOMER COMMENTS/ DESCRIPTIN OF WORK
N
TOTAL
Include single line diagram and substation arrangement if appropriate.
LARGEST MOTOR SPECIFICATIONS
O
QUANTITY
TOTALIZER LOAD
SIZE (HP)
L
M
LOCKED ROTOR CURRENT
KW
MOTOR CODE LETTER
SUBMITTED BY: _________________________________ DATE: ______________________
GENERAL LOAD
VOLTAGE
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
PURPOSE
INFORMATION BELOW WILL BE FILLED IN BY PECO:
Service Request No.
BUS/MAJ ACCT REP
TELEPHONE
DATA RECEIVED
DESIGNER
POL SUB
RATE
RIDER
CONTRACT LIMITS
SIC NUMBER
T
DATE REPLY
NUMBER
COMPLETED
AMPS
CIRCUIT
C-QUAD
T-QUAD
LOAD (KVA)
SUMMER_____WINTER ____
SERVICE CHARACTERISITICS – Select One from Each
POLE # / MH # LOCATION
CUT THROUGH DATE
SERVICE TYPE
URD
RATE:
Residential
Comm (Non-
Comm (Demand)
HT/PD
Demand)
GENERATION PROCUREMENT CLASS:
Class 1 (Residential)
Class 2 (Commercial, less than 100kW)
Class 3 (Commercial, 100kW to 500kW)
Class 4 (Commercial, greater than 500kW)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load
estimates for the first year of service. The customer’s Procurement Class will be adjusted each year,
based on actual usage.
METER TYPE:
KWH
IND. DEMAND
RECORDER
TOU
SERVICE PHASING:
SINGLE PHASE
TWO PHASE
THREE PHASE
SERVICE REQUIREMENTS:
METERING LOCATION AND REQUIREMENTS:
Present Location:
Meter # _______________
CTs-
PTs-________
Present Service OK
Loop Only
________
Taps Only
See Job # ________________________________
Indoo
Outdoor
On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above
r
Ground
ADVANCE NOTIFICATIONS:
CUSTOMER BILLING:
Underwriter’s Cert.
Yes
No
Advance Billing
$_______________
Required
__
Customer to Trench
No Customer
Permit Required
State
Other
Charges:
_______________________
Cust. #
Date
ACT 222 Cert. Required
Yes #
N/A
_________________________
___________________________
_____________
BTCO #
PA One Call #
________________________
__________________________
CATV #
Gas
BTCO
CATV
___________________
Other
SKETCH / INSTRUCTIONS
PHILADELPHIA COUNTY
Email:PhilaNewBusiness@ex
Email:DelChesterServiceApplications@exe
loncorp.com
*
If Applicable
**
Please use this address when applying for underwriter’s inspection
E-MAIL ADDRESS #
Not Started – Date Customer Will Start Work: _____/_____/_____ In Progress Completed
CUSTOMER COMMENTS/ DESCIPTION OF WORK:
T NUMBER
SUMMER_____WINTER
____
Comm (Non-Demand)
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for
the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage.
CTs- ________
Indoor Outdoor
On ________
Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground
See Job # _________________________________
Underwriter’s Cert. Required
Advance Billing Required Yes
$_________________
No Customer Charges: $_________________
Other _______________________
Cust. # _________________________
Date ___________________________
Yes # _____________
BTCO # ________________________
PA One Call # ___________________________
Date __________________________
CATV # ________________________
Other ___________________
Other __________________________
After you have received your PECO Service and Meter Application form, it's important to carefully complete it to ensure your electric service needs are accurately processed without unnecessary delays. This form is used to request new services, changes, or updates to existing services. Below are detailed instructions on how to fill out the form correctly. Once completed, the form should be sent to the appropriate PECO regional office specified on the form, ensuring all required documentation and plans are included. Processing times can vary, so submitting your form as early as possible is recommended.
After filling out the form, double-check all sections for accuracy and completeness. Incomplete information may cause delays, so review your application carefully before submission. Include any additional required documents, such as site plans or diagrams, as specified in the form instructions. Once everything is in order, send the form and attachments to the PECO regional office you identified in step 2. Keeping a copy of the completed form for your records is advisable.
How do I select the correct PECO regional office for submitting my application?
To select the correct PECO regional office, first refer to the top section of the PECO Service and Meter Application form. There, you will find a list of regional offices categorized by geographical area. Identify the area in which the electric service is requested, and then check the corresponding box on the form. Each listed office covers specific counties or areas, so be sure to send or fax your completed application to the office responsible for the service location you're requesting.
What information is needed for the customer and service location section?
In this section, you will need to fill out the customer's name and the specific location where the service is requested. It is now mandatory to include the customer's Driver's License Number or Social Security Number. If you have a PECO Energy pole number and/or lot number, include this information only if it's applicable to your service request. For an underwriter's inspection, remember to use the service location address. This detail helps in clearly identifying the service site for PECO and ensures accurate processing of your application.
What should I do if my request involves a demolition?
If your service request involves demolishing a building and requires PECO to remove electric or gas facilities, you must call 8-1-1 for a PA ONE CALL demolition request. PA ONE CALL is a safety and communication system designed to prevent damage to underground utilities during excavation activities. This step is crucial for ensuring the safety of the demolition process and prevents accidental damage to utility lines, which could lead to service disruptions or safety hazards.
Is a credit application and agreement necessary for all service requests?
A credit application and agreement must be completed if you have not had PECO service within the last 60 days. This requirement ensures that PECO has up-to-date credit information for billing purposes. If no further communication is received from the customer within 90 days of PECO's response to the service request, PECO reserves the right to cancel the request. This policy helps manage and prioritize service requests efficiently while ensuring that all customers receive timely service.
Filling out the PECO Service and Meter Application form is an important step in ensuring your electric service needs are met accurately and efficiently. However, common mistakes can lead to delays. One common error is not selecting the correct PECO regional office to which the application should be sent. Each region has different requirements and failing to send your application to the correct office can result in unnecessary delays.
Another frequent oversight is not providing the required customer information accurately, including the customer's name, service location, and especially the requirement for a Driver's License Number or Social Security Number. Missing or incorrect information in these fields can significantly slow down the process.
Applicants often forget to complete the fields for their billing address or the PECO energy account number from the last 60 days, which is necessary to confirm your identity and billing history. Similarly, details pertaining to the electrician or contractor, such as the Tax Identification number and a preferred address for correspondence, are sometimes overlooked or incorrectly filled out.
Incorrect indication of the current construction status and the requested service date can lead to scheduling issues. Being specific about dates rather than using vague terms can help PECO better accommodate your service request timelines.
Specifying the type of request, service, and meter information inaccurately can cause technical and logistical problems. It’s crucial to detail whether the service is for a new connection, upgrade, or change, as well as the specific requirements for the meter, such as single, dual, or multiple meter setups.
Failing to complete the load characteristics table with details like connected kW, maximum summer kW demand, and winter kW demand can lead to an underestimation or overestimation of your electrical needs. This mistake might result in improper service allocation or unexpected future adjustments.
Another common mistake is not including motor information or information about compensated metering if it will be used. Accurate details regarding totalizing meter setups and general load help in designing the right service for your needs.
Lastly, applicants often leave the application unsigned and undated, which automatically makes the application incomplete. A signature and date are necessary to verify the information and to initiate the processing of your application. Taking the time to review the form for these common errors before submission can facilitate a smoother and quicker service setup.
Completing the PECO Service and Meter Application is a significant step for those seeking to initiate or modify electricity service. However, this application often requires or is enhanced by additional documentation to ensure a smooth process and to meet all regulatory and company requirements. Understanding these forms and their purposes can notably streamline your dealings with PECO and other entities involved in providing utility services.
While each document serves its unique purpose, from ensuring safety standards to defining technical specifications, they collectively contribute to a well-rounded application process. It's important to gather and understand these documents early on to avoid delays or complications. Whether you're a homeowner looking to establish new service or a contractor managing a large development, these supporting documents will help pave the way for a successful project completion.
One similar document is the utility initiation form used by gas companies. Like the PECO Service and Meter Application, this form gathers customer information for starting gas service, including customer identification and billing address. Both forms require technical details about the service needed, such as the type of service and specific requirements based on the property and planned usage. They both ensure that the service provided meets local regulations and the customer's needs.
The construction permit application form is another similar document. It also collects detailed information about a construction project, such as location, the contractor's details, and specifics about the planned construction. Just as the PECO form requires details about electric service needs for new or upgraded service connections, the construction permit focuses on the broader scope of building requirements and compliance with local building codes.
Another comparable document is the application for water service initiation. This form, similar to the PECO application, gathers customer and property information for the purpose of connecting to municipal or regional water services. It details the type of property being served and may require information on the expected water usage, just as the electric service application does for power needs.
The business license application shares similarities as well. It requires detailed information about the business, including its location, the type of business, and owner information. Comparable to the electric service application, it's a necessary step for establishing a legal utility or service requirement for a new or existing business, ensuring that all operations comply with local ordinances and regulations.
Telecommunications service applications resemble the PECO document in their collection of detailed customer and service information. They require specifics about the service requested, including location and technical needs, tailored to the installation of phone, internet, or other communication services. The focus is on ensuring that the technical capabilities match the customer's requirements while adhering to industry standards.
A zoning permit application is also akin to the PECO service and meter application in that it captures details about a property and its intended use to ensure compliance with local zoning laws. The specifics about the project or service need, similar to the electrical or construction details on the PECO form, help authorities determine if the proposed use aligns with zoning requirements.
An environmental compliance form, though more focused on environmental protection, collects detailed information about a project or operation similar to the PECO application. It examines the potential impacts on water, air, and soil, drawing parallels in the need to assess and mitigate any adverse effects that utility installations may have on the environment.
Lastly, the permit application for outdoor signs and fixtures shares similarities with the PECO application by requiring detailed information about the location, the type of installation, and technical specifications. Both forms are vital for ensuring that the installations meet specific safety and aesthetic standards set by local authorities.
When completing the PECO Service and Meter Application form, it is important to follow specific guidelines to ensure a smooth and efficient processing of your application. This list outlines a series of do's and don'ts that applicants should adhere to:
When navigating the process of applying for electric service and meter setup with PECO, applicants occasionally encounter misunderstandings. Addressing these misconceptions can streamline the application process and ensure a smoother experience. Here are ten common misconceptions and clarifications regarding the PECO Service and Meter Application form:
Understanding and addressing these misconceptions can facilitate a smoother and more efficient service and meter application process with PECO, ensuring customers are well-informed and properly prepared for their electric service requirements.
When applying for electric service and meter installation or changes with the PECO Service And Meter Application, understanding the process and requirements is crucial for a seamless experience. Here are key takeaways to consider:
Additionally, it's important to note that all work must comply with PECO Electric Service Requirements and be inspected by an approved agency. Service voltages vary by area, so it's recommended to confirm the service availability and meter location with PECO ahead of any major purchases or construction. Finally, if you haven't had PECO service in the last 60 days, completing a credit application and agreement will be required.
Remember, incomplete information can delay the processing of your application, so ensure every section is completed accurately. If demolishing a building and needing PECO to remove electric or gas facilities, contact PA ONE CALL. Always keep open communication with PECO, especially if there are updates or changes to your application details.
Da Form 7666 - By providing a legally binding plan, it ensures that care for a service member's dependents is not left to chance.
Profits or Loss From Business - Completion of this form requires information on cost of goods sold, which is critical for businesses that manufacture or resell products.